Manual weight controller with light code
Manual weight controller with light code
The weight controller equipment performs a fast and intuitive interpretation of the programmed weight from light signals. This way, the required weight and optimal results are achieved.
Description
The manual weight controller with light code is an equipment which, with a colour code, controls if the amount of product is the correct one or, on the contrary, the weight is over or below the stated scale.
- If the red light turns on, the operator will have to add more units to the tray.
- If the orange light turns on, the operator will have to add one unit to the tray.
- If the blue light turns on, the operator will have to remove one unit from the tray.
- If the white light turns on, the operator will have to remove more than one unit from the tray.
- If the green light turns on, the operator will have achieved the desired weight.
This is a very visual and intuitive code, improving the operators’ efficience and the production line productivity.
Although this product was designed as an autonomous one, Veserkal contemplates the creation of a set of products which can be connected to a PLC (Power Line Communication) to programme the stated weight for all the equipment set.
Features
- Range of weight, from 100 g to 10.000 g (according to model).
- Accuracy depending on weight range (weight 10 kg/accuracy 1 g).
- The control unit can serve 32 equipments.
Technical data
- Made in AISI 304 stainless steel.
- Electrical power supply: 230 V (50/60 Hz).
Configuration
- Manual weight controller with PLC.
- Peripheral weight controller dependent on the control unit.
The solution
- Totally intuitive colour code which significantly speeds the work of operators to achieve the desired objective.
- Increased productivity directly proportional to the number of installed terminals.
- Control up to 32 devices through a single control unit.
